A Swiss precision measurement instrument company faced a challenge that many high-tech manufacturers know all too well: they needed a power supply with exceptional output voltage accuracy — ±0.1% — for their calibration equipment. Standard industrial power supplies typically offer only ±5% regulation, which is far too loose for instruments that demand exacting reference voltages. The gap between "good enough" and "precise enough" seemed insurmountable.

For years, the company relied on laboratory-grade linear power supplies. These units delivered the required accuracy, but at a staggering cost — roughly 10 times that of a standard switching power supply. They were bulky, inefficient, and generated significant heat. The company's engineering team knew there had to be a better way, but every alternative they evaluated either sacrificed precision or failed to meet their stringent efficiency targets.
KRECO's engineers took a fresh look at the problem. Instead of choosing between the high accuracy of linear regulators and the high efficiency of switching converters, they combined them. The result was a hybrid switching-linear power supply topology. A switching stage handles the bulk conversion with 92% efficiency, while a linear post-regulator provides ultra-low noise and tight regulation. A digital trim circuit allows fine adjustment of the output voltage to within ±0.08% — exceeding the customer's original specification of ±0.1%.
Accuracy: ±0.08% (exceeds the ±0.1% requirement)
Efficiency: 92% (compared to ~40% for pure linear supplies)
Cost Reduction: 60% less than the previous lab-grade solution
These numbers represent more than technical achievements. They translate directly into competitive advantage for the Swiss company: lower bill of materials, smaller enclosure size, reduced cooling requirements, and a faster path to market for their precision instruments.
His surprise is understandable. For decades, the conventional wisdom held that switching power supplies were inherently noisy and imprecise — suitable only for applications where cost and size mattered more than accuracy. KRECO's hybrid design shatters that assumption. By intelligently merging two proven topologies, we deliver the precision of a linear supply with the efficiency and affordability of a switcher.
This case proves a powerful point: precision doesn't have to come at a premium. Too often, engineers default to over-engineered, overpriced solutions because they assume high accuracy requires exotic components or specialized architectures. KRECO demonstrates that thoughtful engineering — combining existing technologies in novel ways — can achieve superior results at a fraction of the cost. Whether your application demands ±0.1% or even tighter, we can design a power supply that meets your needs without breaking your budget.
Choose KRECO. Because precision should be accessible, not exclusive.